Fluid-lines are Everywhere

WHAT IS A FLUID-LINE?

Fluid-line
“an extended hollow conduit that conveys a fluid from one point to another”
Fluids are: oil, water, fuel, air gas, powder, etc.
ANYTHING THAT FLOWS
Fluid-lines may be flexible (rubber, nylon, Teflon, polyvinyl, etc.) They may be rigid (steel, aluminum, copper, etc.) or they may be a combination of both.
Fluid-lines are used to transfer energy as with hydraulics where fluid is transferred under pressure to move actuators that produce work.
In the case of air conditioning, the fluid-line is used to transfer heat away from the occupant’s environment.
Fluid-lines are everywhere!
The collective fluid-line is segmented in to several categories:
-automotive power steering lines
-automotive air conditioning lines
-hydraulic hose lines
-teflon hose lines
-thermoplastic hose lines
-air and construction hose
-mobile refrigeration lines
-public transportation air conditioning lines
-pneumatic hose lines
-pressure wash hose
-agricultural hoses
-diesel fuel injection tubes
-stainless steel tube lines
-automotive high performance hose and fittings
There are several other types of assemblies the Tubes n’ Hoses equipment can fabricate.
Almost every single one of the above fluid-lines cause total equipment failure when they wear out or fail. This is where the Tubes n’ Hoses system turns “downtime into profits.”
YOUR CUSTOMER BASE IS UNLIMITED WITH THE TUBES N’ HOSES SYSTEM.

WHO IS YOUR CUSTOMER BASE?